← MicroPython on Pi Pico and Projects

Chapter 3 Companion

Chapter 3 Notes Page

Fill this out as you read Chapter 3, Physical computing. You can write your answers in your own words: you do not need full sentences.

Name: Period: Date:

Part 1: Your Pico’s Pins

Vocabulary

Fill in the physical pin number (or numbers) for each one from the pinout figure, not just what it means.

WordPin #(s)What it means
GPIO pin
PIO
ADC
VBUS
VSYS
GND
RUN
Brownout

Careful reading

  1. Your Pico's GPIO pins start counting at the number instead of the number .
  2. The pin numbering skips from GP22 straight to GP26_ADC0. Why is there a gap?

  3. Most of your Pico's pins can work as either an input or an output. What decides which one a pin actually is?

Part 2: Electronic Components

The chapter shows a figure with nine common components, each labeled with a letter. Find that figure, then fill in the letter for each component, say whether it’s mainly an input, an output, or a connector, and what it actually does.

ComponentLetterInput, output, or connector?What does it do?
Resistor
Jumper wire
LED
PIR sensor
Breadboard
OLED display
Piezoelectric buzzer
Potentiometer
Push-button switch
  1. A PIR sensor is a kind of input device called a sensor. What does this particular sensor detect?

  2. A potentiometer can actually work as two different kinds of component. Name one of them.

Part 3: Reading Resistor Colour Codes

This part is a quick, useful skill, not something to stress over.

The chapter's example resistor has two orange bands and one brown band. The two orange bands give the digits and . The brown band means multiply by . Put together, that resistor is ohms.

  1. What colour bands would a 100 Ω resistor have?

  2. If you wanted the cheapest resistors, what colour tolerance band would you look for?

Wrap-up: 3-2-1

  1. Write 3 things you learned in this chapter.

  2. Write 2 questions you still have.

  3. Write 1 way this chapter connects to something you already know or have seen before.